Mower conditioner

The KRONE BiG M 450 is a self-propelled high-capacity mower conditioner for professional forage harvesting. With a working width of 9.90 m in the CV version, it combines high work rates with mowing and immediate crop conditioning in a single pass. Three mowing units, powerful conditioners and a 449 hp Liebherr engine make the BiG M 450 a high-performance solution for agricultural contractors, machinery-sharing groups and farms that demand high output and readiness for work within short harvesting windows. Its manoeuvrability, balanced weight distribution and low centre of gravity also allow it to work in smaller fields, on slopes and in difficult ground conditions.

 

Mowing and conditioning in a single pass

A self-propelled mower conditioner combines mowing and immediate conditioning of freshly cut forage in one dedicated machine. The plant material is treated immediately after cutting to aid the subsequent drying process. The BiG M is ready to mow without first having to change implements. This makes it possible to respond quickly to suitable conditions, particularly when harvesting windows are short and arise at short notice.

The BiG M 450 has three mowing units operating across the full working width of 9.90 m. Direct power transmission from the engine via banded V-belts and PTO shafts enables high throughput; KRONE specifies work rates of more than 17 ha/h. Cutting height and mower ground pressure can be adjusted fully hydraulically from the cab.

KRONE uses Heavy-Duty cutterbars for a clean cut. The fully welded, lifetime-lubricated Heavy-Duty cutterbar combines the SmartCut system, which ensures precisely matched overlap between blade paths, with SafeCut impact protection. Each mowing disc is individually protected. Wide skids and uniform ground pressure also help protect the grass sward.

 

Different conditioners for different crops

Forage conditioning requirements vary according to the crop. For grass crops, the BiG M 450 can be equipped with a CV tine conditioner. Its V-shaped steel tines treat the crop across the full working width. Conditioner speed can be set to 700 or 1,000 rpm without tools; the gap between the tines and the corrugated baffle plate is also infinitely adjustable. This allows conditioning intensity to be adapted to the harvesting conditions.

CR roller conditioners are available for leafy crops such as clover or lucerne. Polyurethane or steel rollers can be used depending on operating conditions. The steel rollers are known as M-Rolls. The rollers treat the plant stems while preserving delicate leaves as far as possible. The gap between the conditioner rollers can be set to three positions from the cab.

 

Flexible crop placement for subsequent harvesting operations

The BiG M 450 can place the mown and conditioned forage in different ways, depending on its equipment and the harvesting method. With the swath hoods open, the crop is spread across a wide area. As an option, the two side mowers can use large augers to convey the forage towards the centre and place it in a single swath together with the crop from the front mower. This allows mowing, conditioning and swathing to be carried out in a single pass.

Partial-width spreading is also possible. The forage from one side mower is conveyed towards the centre, while the forage on the other side is spread across a wide area. These different placement options allow mowing to be flexibly matched to the harvesting machinery that follows.

 

High work rates and manoeuvrability

A self-propelled mower conditioner such as the BiG M 450 combines high work rates with readiness for work. At the same time, the machine concept is designed for more than just large, level fields. Hydraulic wheel drive and a steering angle of more than 50° provide excellent manoeuvrability. Weight distribution of 64% on the front axle and 36% on the rear axle, together with the low centre of gravity, supports traction and stability even in demanding conditions.

The side mowers feature DuoGrip suspension at their centre of gravity. Mower ground pressure can be adjusted fully hydraulically from the cab. The wide range of movement allows the mowers to adapt to slopes, ditches and banks. As an option, the front mower can automatically adjust its lateral offset according to the steering angle and slope angle to ensure sufficient overlap when cornering and working on slopes.

For rapid travel between fields, the self-propelled mower conditioner reaches road speeds of up to 40 km/h. The BiG M 450 achieves this speed at an engine speed of just 1,250 rpm. In transport position, it remains less than 3 m wide and less than 4 m high.

 

Automation and reduced operator workload

KRONE GPS Guidance allows the BiG M 450 to steer automatically along predefined tracks. This helps reduce overlap and avoid missed areas. SectionControl automatically raises and lowers the individual mowing units at headlands and in tapered field areas.

Engine output is also adjusted to demand. PowerSplit automatically switches between 354 hp in Eco mode and 449 hp in Power mode. Automatic engine load control also adjusts forward speed to engine load.

 

BiG M 450 Self-propelled mower conditioner for professional forage harvesting

With a working width of 9.90 m, engine output of up to 449 hp and a choice of conditioner systems, the KRONE BiG M 450 combines high output with flexible forage conditioning. The self-propelled concept ensures readiness for work without first having to change implements. Automation functions such as KRONE GPS Guidance and SectionControl reduce operator workload and unnecessary overlap. Mowing, conditioning and, with the appropriate equipment, swath grouping can therefore be efficiently combined.

 

 

What is a self-propelled mower conditioner and how does it work?

A mower conditioner combines mowing and conditioning the crop in a single pass. Immediately after cutting, the forage passes through a tine or roller conditioner. This acts on the plant structure to support the subsequent drying process.

A self-propelled mower conditioner combines the drive system, mowing units and conditioners in one machine. On the KRONE BiG M 450, the conditioners operate across the full working width of each mowing unit. Depending on the crop, V-shaped steel tine conditioners and polyurethane or steel roller conditioners are available.

What are the benefits of a self-propelled mower conditioner?

A self-propelled mower conditioner conditions freshly cut forage as it is mown. This combines mowing and conditioning in a single pass and supports the drying process.

Another benefit of the self-propelled concept is that the machine is ready to work without first having to change implements. This allows operators to respond quickly to suitable harvesting conditions, especially when harvesting windows are short and arise at short notice.

Depending on its specification, the BiG M 450 can also spread the conditioned crop across the full width or gather it directly into a swath. Under suitable conditions, wide spreading can eliminate an additional tedding pass. With the optional swath merging system, mowing, conditioning and swathing can all be completed in a single pass.

What is the difference between a mower and a self-propelled mower conditioner?

A mower primarily cuts the crop. A self-propelled mower conditioner combines cutting and conditioning freshly mown forage in a self-contained machine. The crop is treated immediately after mowing, for example with tines or rollers.

The BiG M 450 uses three disc mowers with conditioners. This allows the crop to be mown and conditioned in one continuous operation.

Why is grass conditioned immediately after mowing?

Conditioning acts on the plant structure immediately after cutting. In the CV tine conditioner, for example, V-shaped steel tines carry the forage past a corrugated plate, treating the plants’ protective wax layer. This supports the subsequent drying process.

Rapid drying can help shorten the time the forage remains in the field. At the same time, conditioning intensity must suit the crop so that sensitive, leafy forage in particular is handled as gently as possible.

What is the difference between a tine conditioner and a roller conditioner?

A tine conditioner uses rotating tines to treat the crop intensively. The KRONE CV conditioner uses V-shaped steel tines. It is designed particularly for stemmy crops, and its speed and conditioning intensity can be adjusted to suit different conditions.

A roller conditioner, by contrast, feeds the crop between two profiled rollers. KRONE CR roller conditioners are intended particularly for leafy forage such as clover or lucerne. Depending on operating conditions, polyurethane rollers or steel rollers known as M-Rolls are available.

Which conditioner is suitable for clover and lucerne?

CR roller conditioners are particularly suitable for leafy crops such as clover and lucerne. The rollers treat the plant stems while handling the delicate leaves as gently as possible. This is important because the leaves contain valuable forage constituents.

The BiG M 450 offers a choice of profiled polyurethane rollers or steel rollers known as M-Rolls. The roller gap can be adjusted to three positions from the cab.

What are the working width and area output of the KRONE BiG M 450?

The CV version of the KRONE BiG M 450 has a working width of 9.90 m. To achieve this, the self-propelled mower conditioner combines a front mower with two side mowing units.

According to KRONE, the drive concept enables the BiG M 450 to achieve area outputs of more than 17 ha/h. Actual output in the field depends on factors including the crop, field layout and operating conditions.

How much power does the KRONE BiG M 450 have?

The BiG M 450 is powered by a Liebherr six-cylinder in-line engine with a maximum output of 449 metric hp. KRONE PowerSplit engine management adjusts the available engine power to the power required.

In Eco mode, 354 metric hp is available. When more power is required, the system automatically switches to Power mode with 449 metric hp. This delivers engine power according to demand and reduces fuel consumption.

Can the BiG M 450 place forage directly into a swath?

Yes. With the optional swath merging system, the BiG M 450 can use large augers to move the crop from both side mowers towards the centre of the machine and deposit it together with the forage from the front mower. This combines mowing, conditioning and swathing in a single pass.

Alternatively, wide spreading and partial-width spreading are possible. This allows crop placement to be adapted flexibly to the subsequent harvesting operations.

Is the BiG M 450 also suitable for smaller fields and slopes?

Yes. The self-propelled mower conditioner is designed for more than just large, level fields. Rear-wheel steering, four-wheel drive and balanced weight distribution provide manoeuvrability and traction.

The side mowers feature DuoGrip centre-of-gravity suspension. Mower ground pressure can be adjusted fully hydraulically from the cab. A wide lateral movement range helps the mowers follow uneven ground, slopes, ditches and embankments.

In addition, the front mower can shift sideways automatically according to the steering angle and slope angle. This maintains the necessary overlap with the side mowers when turning and working on slopes.

How do GPS Guidance and SectionControl assist the BiG M 450 operator?

KRONE GPS Guidance allows the BiG M 450 to steer automatically along predefined guidance lines. The aim is accurate tracking with minimal overlap and no missed strips. This reduces the operator’s workload, especially during long working days.

SectionControl automatically raises and lowers the individual mowing units at headlands and tapered field ends. This avoids unnecessary overlap and repeated mowing of the forage.

Which businesses is a self-propelled mower conditioner such as the BiG M 450 suitable for?

As a self-propelled mower conditioner, the BiG M 450 is designed for high output in professional forage harvesting. Its working width of 9.90 m and area output of more than 17 ha/h make it particularly attractive to agricultural contractors, mowing cooperatives and farms that need to mow large areas within short harvesting windows.

Because the machine is ready to work without first having to change implements, the concept is particularly suited to operations that need to respond to suitable harvesting conditions at short notice. At the same time, its manoeuvrability, ground contour following and chassis design also allow it to work in smaller, more challenging fields.